電加熱反應釜是用不銹鋼制作的嗎
發布時間：2017-11-16 9:19:28 來源: 瀏覽次數：
摘要：電加熱反應釜從不銹鋼市場了解到這種金屬篩網價格不貴質量也不錯，對于小不銹鋼反應釜也可以自己設計制造。
電加熱反應釜從不銹鋼市場了解到這種金屬篩網價格不貴質量也不錯，對于小不銹鋼反應釜也可以自己設計制造。大規格的不銹鋼反應釜則可請不銹鋼反應釜制造廠加工。接下來為大家介紹這種不銹鋼反應釜底的這幾原理和制作理念。因為所有的問題都是因為固體反應物料沉淀到不銹鋼反應釜底造成的。那么主要的解決辦法就是要在即使沒有混合或攪拌的情況下也要避免發生沉淀。這可通過加進一個輔助的不銹鋼反應釜底而實現，該輔助的不銹鋼反應釜底比實際的要稍高一點，留出3～10厘米的間隙。這樣固體反應物將沉淀在這個輔助的不銹鋼反應釜底上，而不會在實際的不銹鋼反應釜底上形成絕熱層。通過不銹鋼反應釜底間隙間的對流作用熱傳遞將是連續均勻的。 輔助的不銹鋼反應釜底用高強度不銹鋼(SS314)制成，上面帶有許多小孔，孔徑比反應物料的粒徑略小，將這種篩網切成圓形。其邊緣向下彎曲作支撐，當固體反應物料負荷很重時，輔助底下面可以加一個金屬環作為支承。這樣便可避免固體物料集中在不銹鋼反應釜底。
From the stainless steel market, this kind of metal screen price is not expensive, the quality is also good, for small stainless steel reactor can also be designed and manufactured by ourselves. Large size stainless steel reaction kettle can be processed by stainless steel reactor manufacturer. Next to introduce the principle and idea of making this stainless steel reaction kettle. Because all of the problems are due to solid reaction material to the stainless steel reaction kettle bottom caused by precipitation. So the main solution is to avoid precipitation even in the absence of mixing or mixing. This can be through the addition of an auxiliary stainless steel and stainless steel reaction kettle, the reaction kettle auxiliary than they would be a ittle higher, leaving a gap of 3 to 10 cm. This solid reactant will precipitate in the auxiliary stainless steel reaction kettle, and not on the stainless steel reaction kettle bottom is formed on the insulating layer of the actual. Through the convection heat transfer between the stainless steel reactor bottom gap will be continuous and uniform. High strength stainless steel with stainless steel reaction kettle auxiliary (SS314) made with many holes above the aperture ratio of reactants particle size is smaller, the screen will be cut into round. The edge is bent downward to support, and when the solid reaction material is very heavy, a metal ring can be added under the auxiliary bottom as the support. This is to avoid the solid material in stainless steel reaction kettle.
電加熱反應釜不銹鋼反應釜價格較高，微小損壞時沒有必要整臺設備更新，這就需要選用合適的修補法，否則，就會使反應釜被釜里溶劑腐蝕，搪瓷面的損壞會迅速擴大，并由此造成停產、安全事故及環境污染等不可預計的損失。化工行業中使用的反應釜，因為介質的腐蝕性強、反應條件忽冷忽熱、以及運輸、使用、人為等問題，總會出現這樣那樣的搪瓷層損壞,造成生產停止，如大面積脫落，建議選擇不銹鋼反應釜。
Stainless steel reactorhigher prices. Tiny damage when there is no need to update the whole sets ofequipment, which requires selection of appropriate repair method, otherwise, itwill make reaction kettle kettle solvent corrosion, the enamel surface damagewill expand rapidly, resulting in production, safety accidents andenvironmental pollution, dyeing and other unpredictable loss. The reactor usedin the chemical industry, because of strong corrosive medium, reactionconditions by fits and starts, and transportation, the use of human and otherproblems, there is always a kind of enamel layer is damaged, due to stopproduction, such as off a large area, it is recommended to choose stainlesssteel reactor.
上一篇我們送上的文章是電加熱反應釜在焊接的時候需要注意什么為了更加全面的介紹反應釜加熱器、電加熱反應釜、遠紅外反應釜、遠紅外加熱器等產品，我們將持續發布最新知識，幫助大家了解更多的信息。 在下一篇繼續做詳細介紹，如需了解更多，請持續關注。
本文由生產廠家揚中市金元化工電力設備廠于2017-11-16 9:19:28整理發布。
轉載請注明出處：http://www.displaypower.cn/news/2815.html。
上一篇：電加熱反應釜在焊接的時候需要注意什么
下一篇：反應釜加熱器是液體循環是密閉的
